Product ID:MIL-P-24441/1 F-150A COMP 24272, F-07P02A
MSDS Date:01/29/1992
FSC:8010
NIIN:00-922-1154
Kit Part:Y
MSDS Number: BTSGR

SEAGRAVE COATINGS CORP OF VA

4030 SEAGUARD AVENUE
PORTSMOUTH, VA 23701
US

Emergency Phone: 804-488-4411/800-424-9300 CHERMTREC

Info Phone: 804-488-4411

Cage: 60163

SHERWIN-WILLIAMS, SEAGUARD

PORTSMOUTH, VA 23704 US

Telephone: 757-397-2223

Cage: 60163

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 5 - 10%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG(FE)/M3FUME,B2;94

TALC (CONTAINING ASBESTOS)

CAS: 14807-96-6

RTECS: MW2700000

Fraction By Weight: 35-45%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.2 FIBERS/CC; 9394

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 10%

OSHA PEL 10 MG/M3 RDUST; Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9394

N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 25.48%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

AMIDO-AMINE-RESIN

CAS: 68443-08-3

Fraction By Weight: 5%

FORMALDEHYDE RESIN

Fraction By Weight: 25%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN CONTACT-PRIMARY IRRITATION. EYE
CONTACT-PRIMARY IRRITATION.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:INHALATION-IRRITATION TO THE RESPIRATORY TRACT,
HEADACHE, DIZZINESS AND NAUSEA.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS
PRODUCT.

First Aid:INHALATION-REMOVE TO FRESH AIR, RESTORE BREATHING. CONSULT A
PHYSICIAN. SKIN CONTACT-FLUSH WITH WATER. EYE CONTACT-FLUSH
IMMEDIATELY WITH LARGE AMOUNTS OF WATER. CONSULT A PHYSICIAN.

Flash Point Method:TCC
Flash Point:99.0F,37.2C
Lower Limits:1.4
Upper Limits:11.2
Extinguishing Media:WATER FOG, DRY CEHMICAL, FOAM ALCOHOL, CARBON
DIOXIDE.
Fire Fighting Procedures:WATER MAY BE USED TO COOL CONTAINERS TO
PREVENT PRESSURE BUILDUP AND POSSIBLE AUTOINGITION OR EXPLOSION
WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, SPARKS, AND OPEN FLAMES. CLOSED CONTAINERS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:AVOID BREATHING SOLVENT VAPORS. ENSURE
ADEQUATE VENTILATION. AVOID SPARKS, FLAMES, AND ANYTHING WHICH
COULD CAUSE FIRE.

Handling and Storage Precautions:STORE IN A COLL DRT AREA WITH
VENTILATION SUITABLE FOR STORING MATERIALS SHOWN IN INGREDIENTS
SECTION.
Other Precautions:PROVIDE RESPIRATORY PROTECTION AGAINST FUMES GENERTED
DURING BURNING.

Respiratory Protection:NIOSH/OSHA APPROVED RESPIRATOR TYPES SUITABLE
FOR INGREDIENTS. APPROVED CHEMICAL/MECHANICAL FILTERS RECOMMENDED
WHEN VENTILATION IS RESTRICTED. APPROVED AIRLINE TYPE RESPIRATORS
OR HOODS RECOMMENDED I N CONFINED AREAS.
Ventilation:SUFFICIENT VENTILATION, IN VOLUME & PATTERN, SHOULD BE
PROVIDED TO KEEP AIR CONTAMINATION LEVELS BELOW TLV LIMITS.
Protective Gloves:RECOMMENDED FOR PROLONGED CONTACT.
Eye Protection:CHEMICAL GOGGLES WITH SIDE SHIELDS.
Other Protective Equipment:USE PROTECTIVE CREAMS WHERE SKIN CONTACT IS
LIKELY. REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN
DESIGNATED AREAS ONLY.
Supplemental Safety and Health
NSN CANCELLED ON 93244, REPLACEMENT NSN IS 8010-01-347-0916.

HCC:F4
Boiling Pt:B.P. Text:244F,118C
Vapor Density:>AIR
Evaporation Rate & Reference:IS SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:BUTYL ALCOHOL ODOR. GREEN LIQUID.
Percent Volatiles by Volume:48.1

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A VIGOROUS REACTION.
Stability Condition to Avoid:THSI PRODUCT IS STABLE UNDER NORMAL
STORAGE CONDITIONS.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON
MONOXIDE.
Conditions to Avoid Polymerization:COULD OCCUR UNDER NORMAL CONDITIONS.
CARE MUST BE EXERCISED.

Waste Disposal Methods:SOAK LIQUIDS WITH SAWDUST OR RAGS AND REMOVE.
FLUSH WITH WATER IF POSSIBLE. AVOID SKIN CONTACT. DISPOSAL SHOULD
BE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.